Added border router container

cloud/microwaveCookPlanner.py

@@ -96,5 +96,6 @@ class MicrowaveCookPlanner:
             "reconciled_mass_g": final_mass_g,
             "mass_validation_status": mass_data["status"],
             "cook_plan": cook_plan,
-            "geometry": vol_data
+            "geometry": vol_data,
+            "edaman_response": edamam_resp
         }

ecran_externe/epaper_thread_node.yaml

@@ -0,0 +1,55 @@
+esphome:
+  name: epaper-display-node
+
+esp32:
+  board: esp32-h2-devkitm-1
+  variant: esp32h2
+  framework:
+    type: esp-idf
+
+# OpenThread configuration joining the Pi's Thread network
+openthread:
+  network:
+    enable_ipv6: true
+  network_name: "OpenThread-Pi"      # Must match OTBR
+  pan_id: 0x1234                    # Must match OTBR
+  channel: 15                       # Must match OTBR
+  network_key: "00112233445566778899aabbccddeeff" # Must match OTBR
+
+# MQTT Client connecting over Thread (IPv6)
+mqtt:
+  broker: "fdde:ad00:beef:0::1"      # RPi OTBR wpan0 IPv6 address
+  port: 1883
+  topic_prefix: microwave/display
+
+spi:
+  clk_pin: GPIO10
+  mosi_pin: GPIO11
+
+display:
+  - platform: waveshare_epaper
+    cs_pin: GPIO8
+    dc_pin: GPIO12
+    reset_pin: GPIO13
+    busy_pin: GPIO14
+    model: 2.13in-d
+    update_interval: never          # Updated explicitly via text sensor
+    id: my_epaper
+    pages:
+      - id: status_page
+        lambda: |-
+          it.printf(0, 0, id(font_small), "Status: %s", id(display_text).state.c_str());
+
+font:
+  - file: "gfonts://Roboto"
+    id: font_small
+    size: 16
+
+text_sensor:
+  - platform: mqtt
+    name: "Display Text Input"
+    id: display_text
+    state_topic: "microwave/display/text"
+    on_value:
+      then:
+        - component.update: my_epaper

orchestrateur/compose.yaml

@@ -1,11 +1,26 @@
+version: '3.8'
+
 services:
+  otbr:
+    image: openthread/otbr:latest
+    container_name: otbr
+    restart: unless-stopped
+    privileged: true
+    network_mode: host
+    devices:
+      # Change /dev/ttyACM0 if your ESP32-H2 RCP enumerates as /dev/ttyUSB0
+      - /dev/ttyACM0:/dev/ttyACM0
+    command: --radio-url "spinel+hdlc+uart:///dev/ttyACM0?uart-baudrate=460800"
+
   mqtt-broker:
     image: eclipse-mosquitto:2.0
+    container_name: mqtt-broker
+    restart: unless-stopped
     environment:
       MQTT_TLS_ENABLED: ${MQTT_TLS_ENABLED:-true}
-    # restart: unless-stopped
     ports:
-      - "192.168.50.1:8884:8884"
+      # Listens on all interfaces (IPv4 and IPv6) for Thread compatibility
+      - "8884:8884"
     volumes:
       - ./mqtt/mosquitto-tls.conf:/mosquitto/config/mosquitto-tls.conf:ro
       - ./mqtt/mosquitto-plain.conf:/mosquitto/config/mosquitto-plain.conf:ro
@@ -14,8 +29,7 @@ services:
       - mqtt-data:/mosquitto/data
       - mqtt-log:/mosquitto/log
     command: ["/bin/sh", "/scripts/start-broker.sh"]
-    # command: ["tail", "-f", "/dev/null"] # Do nothing
 
 volumes:
   mqtt-data:
-  mqtt-log:
+  mqtt-log: