Better cooking_state_temperature_provider

micro_ondes/esp_lora/main.py

@@ -36,6 +36,7 @@ defrost_mode = False
 current_temp = [None, None]
 last_temp = [None, None]
 temperature_asked = False
+last_temp_request_time = 0
 
 
 PING_PAYLOAD = {
@@ -88,7 +89,7 @@ def lora_hardware_thread():
         # 1. Send periodic heartbeat
         if now - last_heartbeat_time >= config.LORA_HEARTBEAT_INTERVAL:
             last_heartbeat_time = now
-            print("\n[LoRa Thread] Sending Heartbeat...")
+            log("\n[LoRa Thread] Sending Heartbeat...")
             if lora:
                 lora.send(PING_PAYLOAD)
         
@@ -104,36 +105,44 @@ def lora_hardware_thread():
 
 # --- COOKING STATE CALLBACKS ---
 def cooking_state_temperature_provider():
-    global current_temp, last_temp, temperature_asked, uart_device
+    global current_temp, last_temp, temperature_asked, last_temp_request_time, uart_device
 
-    def temp_is_none(temp):
+    def temp_is_invalid(temp):
-        return temp is None or temp[0] is None or temp[1] is None
+        return (
+            temp is None 
+            or not isinstance(temp, (list, tuple)) 
+            or len(temp) < 2 
+            or temp[0] is None 
+            or temp[1] is None
+        )
 
-    # Return the current temperature if available, 
+    # 1. Check for UART request timeout (reset lock if 3 seconds pass without a response)
-    # otherwise return the last recorded temperature 
+    now = time.time()
-    # and request a new reading from the WiFi board.
+    if temperature_asked and (now - last_temp_request_time > 3):
-    if temp_is_none(current_temp):
+        print("[CookingState] Temperature request timed out. Retrying UART request...")
-        if temp_is_none(last_temp):
+        temperature_asked = False
-            temps = (0.0, 0.0)
-            print("[CookingState] No temperature data available. Returning default (0.0, 0.0).")
-        else:
-            temps = [last_temp[0], last_temp[1]]
-            print(f"[CookingState] Returning last known temperature: {temps}")
 
-        # Asks the esp-wifi the temperature over UART
+    # 2. Trigger new UART request if idle
-        if not temperature_asked:
+    if not temperature_asked and uart_device:
-            temperature_asked = True
+        temperature_asked = True
-            uart_device.send_as_command(UARTCommand(UARTCommandType.TEMPERATURE_REQUEST, {}))
+        last_temp_request_time = now
-            print("[CookingState] Requested new temperature reading from WiFi board.")
+        uart_device.send_as_command(UARTCommand(UARTCommandType.TEMPERATURE_REQUEST, {}))
-    else:
-        print(f"[CookingState] Returning current temperature: {current_temp}")
-        temps = [current_temp[0], current_temp[1]]
-        last_temp[0] = current_temp[0]
-        last_temp[1] = current_temp[1]
-        current_temp[0] = None
-        current_temp[1] = None
 
-    return temps
+    # 3. Handle fresh incoming reading
+    if not temp_is_invalid(current_temp):
+        temps = [float(current_temp[0]), float(current_temp[1])]
+        last_temp = [temps[0], temps[1]]  # Keep a safe reference copy
+        
+        # Reset current_temp buffer to consume the value
+        current_temp = [None, None]
+        return temps
+
+    # 4. Fallback: Use last valid reading
+    if not temp_is_invalid(last_temp):
+        return [float(last_temp[0]), float(last_temp[1])]
+
+    # 5. Default fallback if no data has ever arrived
+    return (0.0, 0.0)
 
 def cooking_state_on_state_change(state):
     print(f"[CookingState] State changed to: {state.state}")
@@ -173,7 +182,7 @@ async def uart_polling_task():
         if uart_device and uart_device.any():
             command = uart_device.read_as_command()
             if command:
-                print(f"[UART Task] Received command from WiFi Board: {command.command_type}")
+                log(f"[UART Task] Received command from WiFi Board: {command.command_type}")
                 if command.command_type == UARTCommandType.COOKING_PARAMS:
                     params = command.payload
                     print(f"[UART Task] Cooking parameters received: {params}")
@@ -193,10 +202,15 @@ async def uart_polling_task():
                     await asyncio.sleep_ms(200) 
                     cooking_state_on_state_change(cooking_state)
                 elif command.command_type == UARTCommandType.TEMPERATURE_RESPONSE:
-                    payload = ujson.loads(command.payload)
+                    try:
-                    current_temp[0] = payload["dish_temp"]
+                        # Check if payload is already a dict or needs JSON decoding
-                    current_temp[1] = payload["ambient_temp"]
+                        payload = ujson.loads(command.payload) if isinstance(command.payload, str) else command.payload
-                    temperature_asked = False
+                        current_temp[0] = payload.get("dish_temp", 0.0)
+                        current_temp[1] = payload.get("ambient_temp", 0.0)
+                    except Exception as e:
+                        print(f"[UART Task] Error parsing temperature payload: {e}")
+                    finally:
+                        temperature_asked = False
                 else:
                     print(f"[UART Task] Unknown command type received: {command.command_type}")